
Welding preparation and assembly of automatic welding machine
Before welding steel weldments, all dirt, oil stains, oxide scale and rust must be removed. For hot-rolled steel, the welded joints should be pickled, sandblasted or removed with a grinding wheel. Although the uncleaned weldment can be spot welded, it seriously reduces the service life of the electrode, and at the same time reduces the production efficiency and quality of spot welding. For low- and medium-carbon steel with thin coatings, it can be welded directly.
1. Welding time of automatic welding machine manufacturers: When welding medium and low carbon steel, this welding machine can use strong standard welding method (instantaneous power on) or weak standard welding method (long-time power on). Strong standard welding method should be used in mass production, which can improve production efficiency, reduce power consumption and reduce workpiece deformation.
2. Welding current of automatic welding machine manufacturers: The welding current is determined by the size, thickness and contact surface of the weldment. Generally, the higher the metal conductivity, the greater the electrode pressure, and the shorter the welding time should be. The current density required at this time also increases.
3. Electrode pressure: The purpose of the electrode applying pressure to the weldment is to reduce the contact resistance at the solder joint and to ensure the required pressure when the solder joint is formed.

