1. Replace the welding head, CP wire and welding fixture according to product specifications.
2. Adjust the welding pressure and distance between the two welding heads. The distance between the two welding heads should not damage the end face of the capacitor core.
3. Adjust the welding voltage to control the welding current, generally around 30V.
4. Adjust the adjustment knob (1) to adjust the welding speed to a moderate position.
5. Adjust the adjustment knob (2) Adjust the conveying speed of the vibrating track capacitor to a moderate position.
6. Welding machine time setting: 0.1S.
7. The air pressure is controlled at 0.5Mpa.
8. Welding can be started after the adjustment.
9. If an abnormality is found during operation, the power should be cut off immediately, and the maintenance personnel should be notified for maintenance.
10. After daily work, turn off the power and air source to clean and maintain the equipment.