The installation and use of automatic welding machines must comply with technical specifications and standards, and are directly related to the effect of the welding work.
An automatic welding machine is an electrical device that provides a power source with certain characteristics for welding. The automatic welding machine is used to connect the welding clamp or welding gun to the end shaft flange of the industrial robot for welding, cutting or thermal spraying. In modern industry, it is widely used in production.
1. The fixation of the automatic welding machine is very important to ensure stability and firmness; when the fixation is not good and the foundation is unreliable, noise, vibration and other phenomena will occur, which will also cause errors in the weld during the welding process, which will seriously affect the overall The sealing performance and appearance tolerance;
2. Before running, prepare for running.
The standard for normal operation of automatic welding machines is smooth operation, no vibration, no noise, no leakage, and no impact. If there is any abnormal situation, it should be eliminated in time.
3. The operation must be gentle, and it is forbidden to use hammers and other tools for rough installation.
Use the assembly fixture and the internal thread of the shaft end to install, and press the transmission part into the welding machine shaft with the strength of the bolt, so as to protect the internal parts of the welding machine. .
4. When installing, pay special attention to the alignment of the central axis, and the alignment error cannot exceed the use compensation amount of the coupling used in the automatic welding machine;