Lubrication system
The machine tool is equipped with a timed lubrication device, which can perform timed
lubrication on the ball screw nuts, etc.Automatic thin oil lubrication is a timed and quantitative
fully automatic mode, the action is automatically controlled by the CNC system, and can perform
detection and alarm.
Cooling and chip removal system
The machine tool is cooled by a large-flow cooling pump, and the spindle is equipped with
four nozzles for external cooling of the tool during cutting.
10. Hydraulic system
The main control components of the hydraulic system are all from famous domestic and
foreign manufacturers and are stable and reliable.
Protective device
The machine tool is equipped with a fully enclosed protection room with sliding doors on the
front and sides, which is convenient and safe to operate. X and Z are equipped with rust-proof
metal protection pull plates to prevent splashing of coolant and chips, effectively preventing the
splashing of iron chips and coolant from eroding the guide rails, protecting the guide rails and
lead screws, and extending their service life.
Working conditions of machine tools
Power supply:AC380V±10%, 50HZ three-phaseAC.
Allowable fluctuation of power supply voltage: ± 10% ;
Allowable fluctuation of power supply frequency: ± 1% ;
The machine tool must be safely grounded with a separate cable, and the grounding
resistance must be less than 4 ohms.
The ambient temperature range of the machine tool workshop is 15-35℃, the relative
humidity is 40-75%, the atmospheric pressure is 86-106Kpa, the dust concentration in the air
shall not be greater than 10mg/m3, and it shall not contain acid, salt and corrosive gas. The
machine tool is installed in a workshop far away from the source of vibration, heat source and
heat flow, and its vibration is less than 0.5G (G is the acceleration of gravity).
Hot Tags: space frame steel ball cnc milling machine, China space frame steel ball cnc milling machine suppliers, factory, Welding Positioner, Hydraulic Cylinder Welding Machine, Automatic LPG Cylinder Welding Machine, Automatic Piston Rod Welding Machine, Welding Rotary Positioner, Fiber Laser Welding Machine