The working conditions of the automatic welding machine equipment, such as whether there is excessive noise, whether there is obvious vibration during the working process, or whether the quality of the workpiece is degraded.
The price of automatic welding equipment with quality and quantity is not cheap. In order to ensure its long-term stable operation and improve the quality of welding parts, the welding equipment must be maintained in an orderly manner in daily life. If possible, you can set up dedicated maintenance personnel and check regularly.
1. Is the contact good?
Due to the forced air cooling of the automatic welding machine equipment, it is easy to inhale dust from the surrounding and accumulate in the machine. If the frequency of use is high, it is recommended to use some dust removal equipment to absorb internal dust to ensure internal cleanliness, especially when transformers or coils of various levels are contaminated, poor contact may occur, so please pay special attention. Pay attention to the slower part of the gap when wiping. Wipe and regularly check the main wiring components and terminals to see if the screws are loose. If rust is found, remove the rust to ensure good conductivity.
2. Perform regular inspections
When carrying out the inspection of the internal or external joint terminals of the automatic welding machine equipment, the input power switch must be turned off before it can be carried out. For example, when checking the power on of the automatic welding machine, check whether the rotation of the cooling fan is smooth, whether there are abnormal vibrations, sounds, and smells during operation, whether there is gas leakage, whether the joints of the welding wire and the insulation wrap are loose Or peel off, whether there is abnormal heat generation in the soldered cables and various wiring parts.